Shape
Length
Construction
Topsheet
Base
Finish
Hardware
Confirmation

Slasher Split

Starting at $1,299.00 _CAD

Get a free AST Level One course (worth $350) from Coast Mountain Guides with the purchase of any splitboard.

The Slasher Split takes inspiration from its bigger brothers the Swallowtail split and Fissile split. It doesn't need to be ridden as long as the Fissile due to its longer effective edge and short swallowtail.

A short radius, longer pow nose and small swallowtail primes this board to slay all terrain from top to bottom, in true Whistler fashion. It allows for tight carves, stays on top with ease and will even rail on groomers.

The Slasher split is our freeride quiver killer!

* No code needed. We will email you details after checkout. * Conditions apply: Non-refundable or transferable, course needs at least 4 students to run.

Start Building

Choose Your Length

147

152

156

161

167

167w

Inventory for this length is running low. There might be production delay.

Back to Slasher Split Next: construction

Choose Your Construction

XTC Carbon Construction is available as an upgrade to all Prior splitboards and saves an average of 500 grams (1lb 1oz) off a Prior splitboard pressed with our standard Quadraxial Fiberglass.

Quad-glass

+$0.00 info

Quad-glass

Our quad-axial glass/carbon composite (quad glass) is a stitched fabric with fibers running in four directions (+30, -30, 0 and +90 degrees). It also contains two 6cm-wide, 10-count carbon strips running lengthwise down center of each ski. The quad-glass material is layered on each side of a vertically laminated maple woodcores combined with UHMW sidewalls, 4001 sintered bases and nylon topsheets. The fiberglass/carbon configuration of quad-glass creates a responsive, long lasting ride with excellent torsional stability. The additional directional weave creates enhanced torsional stiffness in comparison to the tri-axial fibreglass construction.

XTC Carbon

+$300.00 info

XTC Carbon

Our high-performance XTC Carbon Construction brings splitboard technology to the next level. XTC Carbon Construction is available as an upgrade on all splitboards and saves an average of 500grams (1lb 3oz) off each board. Weight reduction continues to be key to backcountry access as less weight means more vertical with less physical exertion. Ensuring that there is no decrease in performance with weight savings is often thought of as the Holy Grail for backcountry gear manufacturers and XTC takes a big leap towards that spiritual cup. In layman’s terms XTC Carbon Construction uses the same vertically laminated maple and aspen woodcores combined with UHMW sidewalls, 4001 sintered bases and nylon topsheets as in their traditional construction but replaces the fiberglass weave with Prior’s newly developed XTC carbon material.

Back to length Next: topsheet

Choose Your Topsheet

Locally designed custom art.

Back to construction Next: base

Choose Your Base

4001 Sintered Durasurf Base™ Die-Cut, unless otherwise stated.

Back to topsheet Next: finish

Choose Your Finish

All Prior Boards & Skis are factory tuned by our custom technicians and machines.

Factory

+$0.00 info

Factory

All Prior Boards & Skis are factory tuned by our custom technicians and machines so that you can hit the slopes straight from the factory!

A Factory Tuned board finish includes:

• Speed polished bases with machined universal wax.

• Filed/sanded topsheet sidewalls.

*More detailed custom tuning is available via our Pro Tune Service.

Hot Wax

+$20.00 info

Hot Wax

Your new Prior board comes finished with factory machined 90° edge and 1° bevel, speed polish base finish and machine wax. For that extra slick finish you can upgrade to a hot wax for $20. Our specialists will finish and wax your board/ski based on the environment it is destined to spend its days ripping pow, groomed corderoy or spring slush.

Custom hot wax

For maximum wax saturation we iron on your desired temperature of wax thoroughly and let it set. Once it is dry, your board is scraped, brush structured and buffed for maximum glide and moisture release.

Wax options include:

Warm (+5°C to -6°C)
Universal (-7°C to -11°C)
Cold (-11°C and below)

Pro Tune

+$50.00 info

Pro Tune

For extra performance we recommend having your new Prior snowboard hand-tuned to your specifications by the pros at the Prior factory. A Pro Tune includes the following:

Hand edge tuning
The side edge is machined to 89 degrees and the base beveled at 1 degree. The board edges are then hand finished with a diamond stone. If you would like your edges pro-tuned to other specifications please add this to the comments box on your order.
Note: All Prior boards (except alpine models) are detuned approx. 3cm along the effective edge on the tip and tail.

Custom hot wax
For maximum wax saturation we iron on your desired temperature of wax thoroughly and let it set. Once it is dry, your board is scraped, brush structured and buffed for maximum glide and moisture release.

Wax options include:

Warm (+5°C to -6°C)
Universal (-7°C to -11°C)
Cold (-11°C and below)

Back to base Next: hardware

Choose Your Hardware

Board comes with tip/tail clips and Chinese hooks. All other splitboard hardware is available on our accessories page.

Voile Chinese Hooks

+$30.00 info

Voile Chinese Hooks

Phantom Hercules Hooks

+$60.00 info

Phantom Hercules Hooks

Strong, like Hercules. And totally shift-proof!

Back to finish Next: confirmation

Confirmation

Back to hardware

Total with Customization:

$1,299.00 _CAD

Estimated build time: 4 weeks

Free local pick up.

Handmade in Whistler, Canada.

3 Year Warranty.

Click Start Building to see topsheet and base options

Tech & Features

The Slasher can be ridden 3-5 cm shorter than the Fissile due its longer effective edge and short swallowtail.

Rider Type & Best For

Rider Type

Self propelled backcountry adventurers and powder hounds that ride directionally and want the added benefits of the swallowtail design.

Best For

Soft open bowl and gladed powder of all descriptions. Also rides well in hardpack, crud and variable snowpack. It does it all, and well!

CHEAT SHEET

CAMBER: Powder Rocker
SHAPE: Directional Shape
FLEX: Mid Flex
CORE: Vertically Laminated Aspen Poplar core
BASE: 4001 Sintered Durasurf^TM Base Die Cut
AVAILABLE CONSTRUCTION: Quad-axial E Glass or XTC Carbon
SIDEWALLS: UHMW polyethylene sidewalls

View Full Spec Sizing Sheet

Camber

Powder Rocker

Provides floatation and predictability in powder of all kinds, while it also allows the board to initiate sooner. Traditional camber in the tail provides additional power to drive off your back foot.

The Finer Details

Further Customization

Timing

Shipping

Further Customization

Custom Shapes

The Prior shop has been making custom "one off" snowboards since 1989. The layout and design of our factory has been built with this in mind. We can make a board to pretty much any shape and flex pattern you want. The following chart outlines prices for common revisions to existing templates:

Description	C$ surcharge
Custom flex (softer or stiffer)	$70*
Narrowing waist	$150*
Widening waist	$150*
Full Custom Shape: total price +taxes	2000

*These prices are estimates, and are variable depending on the shape and your specific request. Over 1cm of widening needs a custom template.

To apply one of these additional requests to your order, simply search on the website the word "custom" and pick whichever item applies and add to cart along with your order. Write any notes in the additional notes section and we will be in touch if we have any further questions.

Complete Custom Shapes
If your dream board requires more than the revisions listed above please email us with your ideas. Some discussion will be required to determine the best performance results. Ultimately the price will be determined by the complexity of the project.

Lead Times
6-8 weeks upon confirmed order.

Extra Notes
Above surcharges are in addition to price of board.
Prices may change depending upon degree of difficulty.
length restrictions = 197cm
width restrictions = tip/tail 33.5cm, waist 28.5cm

Custom Graphics

Prior has been offering custom graphics since 1989 and provides a complete custom topsheet and base graphic service. This is ideal for riders who want a one-of-a-kind look on their Prior board, and for companies who desire special corporate gifts and/or promotions. Custom Topsheet fees are single set up design fees, and are required for tooling cost coverage. Custom to-sheets can be applied to multiple product and charges are split accordingly. Please contact us for any further enquiries or to begin the design process.

Topsheet Artwork

Topsheet design and colour options are almost unlimited. We can print topsheets of photo color quality. All topsheets are sublimated onto a white, matte nylon topsheet for a professional look and finish. (sorry we cannot sublimate onto a clear topsheet material therefore clear windows are not an option for one off customs). Above prices based on receipt of art in digital file format in either of the following formats:

* For art that is done in vector based (ie. Illustrator or similar) program we require artwork in PDF or AI format.

* For bit mapped based art (ie. Photoshop or similar) we require TIFF, PSD or PDFformats. The File size must be 300 DPI in rectangular shape that measures 6cm longer than desired board length x 34cm wide. Note that files will likely be in excess of 100MB and can be sent by Dropbox etc or dropped off at the factory.

Base Artwork

Prior offers diecut custom bases in one to three colors. As base colors are cut with a drag blade knife, so there are some design limitations. We ask that you first email a low res jpeg file to us for review and approval.

For any custom topsheet or shaping project you will need to contact our sales staff for guidance and accurate quotes. Please email us at orders@priorsnow.com or call 604 935 1923 to chat about your custom artwork or other custom options.

Timing

Our build times vary based on production volume and seasonal needs. We always aim to have your order built within 4 weeks of confirming your order. Sometimes this time will vary but rest assured we are putting the time and effort into hand building your custom ride!

For full custom orders build time is typically 6-8 weeks due to the supplier requirements for non-inventory items.

Afraid you won't have your order in time for your big mission or trip? Don't worry we will do our best to accommodate rush orders that are communicated to us at orders@priorsnow.com

Shipping

Prior ships everywhere!

All shipping is calculated at customer checkout based on weight and destination for delivery.

Camber Profiles

Powder Rocker

Provides floatation and predictability in powder of all kinds, while it also allows the board to initiate sooner. Traditional camber in the tail provides additional power to drive off your back foot.

Traditional

Provides maximum pop, stable landing and excellent edge control and grip thanks to a long effective edge.

Micro-camber

Micro camber provides a stable ride with fast edge to edge engagement. Perfect for powder shapes or riders that want a stable and responsive ride in all conditions.

Hybrid

Provides flotation and predictability in powder and silky smooth transitions edge-to-edge with excellent edge control. 2-4mm of traditional camber underfoot provides energy from turn-to-turn.

Tip

Mild nose rocker profile with traditional camber throughout the rest of the ski. A perfect combination for turn initiation, edge hold and float for this shape.

Flat

Flat rocker is great for powder shapes & bigger waist width boards. Flat rocker provides fast edge to edge engagement and maximum float in the deep stuff.